USED PARTS – BONNIE CAFÉ

USED TRIUMPH BONNEVILLE T100 PARTS FOR SALE

I did a lot of heavy modding and then I sold the bike. As such, I now have a lot of parts sitting in the corner of my closet. I set up this page to offer them to a better home.

If you think I’m asking too much, feel free to make me an offer. You can contact me here.

For price comparison, you can use Bike Bandit’s microfiche at www.bikebandit.com/oem-parts/2014-triumph-bonneville-t100/o/m155986

FOR SALE
OEM Stock Triumph Bonneville T100 (2014) Air Injection System

Stock Triumph Bonneville T100 air injection system removed. Bonnie Cafe. — Stock Triumph Bonneville T100 air injection system. Bonnie Cafe.

Description – This came off when I removed the AIS and used the British Customs plugs. All parts being sold are shown in the above picture. (Irving Penn leaves not included.)
Shape – Excellent. This was taken off at 1000 miles. Everything included is shown in above photo.
Price I’m Asking – $20 USD, payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com.

FOR SALE
Buddy Pegs (OEM Stock Triumph Bonneville T100, 2014)

Used - Buddy/Passenger Pegs from a 2014 Triumph Bonneville T100. In very good shape. Barely worn. — Used – Buddy/Passenger Pegs from a 2014 Triumph Bonneville T100. In very good shape. Barely worn.

Description – The buddy/passenger pegs.
Shape – Very very Good, albeit dirty (yeah, I should’ve washed them before photographing).
Price I’m Asking – $30USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Handlebar Clamps with GenMar Risers (OEM Stock Triumph Bonneville T100, 2014)

Used - Handlebar Clamps from a 2014 Triumph Bonneville T100 with Additional GenMar Risers. In very good shape. — Used – Handlebar Clamps from a 2014 Triumph Bonneville T100 with Additional GenMar Risers. In very good shape.

Description – Stock Triumph Handlebar Clamps with GenMar Risers.
Shape – Very Good.
Price I’m Asking – $50 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
OEM Stock Triumph Bonneville Handlebar (T100, 2014)

Used handlebar of a 2014 Triumph Bonneville T100.

Description – The right side has a seized bolt. See photos.
Shape – Very good.
Price I’m Asking – $30 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
OEM Stock Triumph Bonneville Fork Springs (T100, 2014)

Used front fork springs from a 2014 Triumph Bonneville T100.

Description – The stock springs I pulled when I installed the TEC progressive springs.
Shape – Very good.
Price I’m Asking – $20USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
OEM Stock Triumph Bonneville Speedo/Tach Instrument Cluster Bracket (T100, 2014)

Used tach/speedo instrument cluster bracket for a 2014 Triumph Bonneville T100.

Description – The stock bracket I removed when I installed a flat bracket.
Shape – Very good.
Price I’m Asking – $20 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
OEM Stock Triumph Bonneville Rear Shocks (T100, 2014)

Used rear shocks from a 2014 Triumph Bonneville T100.

Description – The stock shocks from when I installed the TEC piggy back shocks.
Shape – Very good. However, one of them has dings in the top cap from when I stupidly wrapped a towel around it and used it as a hammer – see photos.
Price I’m Asking – $40 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
OEM Stock Triumph Bonneville Oil Fill Cap (T100, 2014)

Description – The stock cap from when I replaced it with a Joker Machine cap.
Shape – Good, not perfect. There are a couple of marks from using a quarter to open it. Not a good design if you want to keep it pristine.
Price I’m Asking – $10 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. However, this will fit in a small padded envelope. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
OEM Stock Triumph Bonneville “Choke” Knob (T100, 2014)

Used Triumph Bonneville T100 choke knob.

Description – The stock knob from when I replaced it with a Joker Machine knob.
Shape – Good. There are “teeth” marks from using Vise Grips to unscrew it.
Price I’m Asking – $5 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. However, this will fit in a small padded envelope. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
OEM Stock Triumph Bonneville Clutch Cable Bracket (T100, 2014)

Used clutch cable bracket for a 2014 Triumph Bonneville T100.

Description – The stock bracket pulled off when I installed the Joker Machine bracket.
Shape – Very good.
Price I’m Asking – $10 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. However, this will fit in a small padded envelope. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Triumph Bonneville Exhaust Pipes

Used exhaust - header pipes and mufflers from a 2014 Triumph Bonneville T100. — Used exhaust – header pipes and mufflers from a 2014 Triumph Bonneville T100.

Description – These are the pipes that I pulled off the bike when I installed the TEC 2-1 exhaust.
Shape – Good. Definitely used but no dings or hits. There is blueing due to the factory tune.
Price I’m Asking – $200USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
OEM Stock Triumph Bonneville T100 (2014) Rear Tail Light Assembly

OEM stock rear tail light (indicators and brake) assembly for a Triumph Bonneville. Bonnie Café.

Shape – Extremely Good. This was taken off at 3000 miles.
Price I’m Asking – $75 USD, payment via PayPal. Everything included is shown in above photo.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com.

FOR SALE
OEM Stock Triumph Bonneville T100 (2014) Front Blinkers

OEM stock front turn signals/indicators/blinkers for a Triumph Bonneville. Bonnie Café.

Shape – Very Good. This was taken off at 3000 miles. There is a scuff on the right indicator from the drop bars. I am more than happy to supply extra photos if desired.
Price I’m Asking – $40 USD, payment via PayPal. Everything included is shown in above photo.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com.

FOR SALE
Hayne’s Shop Manual (Triumph Bonneville, T100, Speedmaster, America, Thruxton, Scrambler: 2001 – 2012)

Hayne's Shop Manual for Triumph Bonnevilles, 2001 - 2012. — Hayne’s Shop Manual for Triumph Bonnevilles, 2001 – 2012.

Description – The go-to 3rd party shop manual. 2001 – 2012
Shape – Excellent.
Price I’m Asking – $20 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. This will fit in a padded envelope (media mail). Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
LonElec ECU Interface Cable

LonElec Engine Control Unit Interface Cable for a Triumph Bonneville T100.

Description – The go-to cable to plug your laptop into your bike’s Engine Control Unit.
Original Install – http://bonniecafe.com/bonnie-maintenance-lonelec-interface-cable-for-tuneecu/
Shape – Excellent.
Price I’m Asking – $20 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. This will fit in a small padded envelope. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Maund Rear Fender Splash/Mud Guard

Maund Fender Eliminator Kit Splash Guard for a Triumph Bonneville.

Description – This is a splash guard leftover from a Maund Fender Eliminator Kit. This is the piece of sheet metal only.
Shape – Excellent, unused.
Price I’m Asking – $20 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. This will fit in a padded envelope. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Maxima 10WT Standard Hydraulic Fork Oil – 1 Liter Bottle

Maxima 55901 10WT Standard Hydraulic Fork Oil - 1 Liter Bottle — Maxima 55901 10WT Standard Hydraulic Fork Oil – 1 Liter Bottle

Description – This is fork oil that can be used for the Triumph Bonneville.
Shape – Unopened.
Price I’m Asking – $5 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. This will fit in a padded envelope. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Four NGK (2202) DPR8EIX-9 Iridium IX Spark Plugs

NGK (2202) DPR8EIX-9 Iridium IX Spark Plugs for Triumph Bonneville.

Description – These are spark plugs for a 2014 Triumph Bonneville.
Shape – Excellent, unused.
Price I’m Asking – $20 USD for all four. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. This will fit in a padded envelope. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Paolo Tarozzi Clip On Bars – 7/8″ with 1″ Shims

Paolo Tarozzi 7/8" bars with 1" shims. — Paolo Tarozzi 7/8″ bars with 1″ shims.

Description – 7/8″ bars with shims that will allow them to be used with 1″ clamps.
Shape – Excellent, unused.
Price I’m Asking – $30 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. These will fit in a padded envelope. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Rev’It Seesoft Back Protector (RV 05)

Rev'It Seesoft Back Protector/Armor, RV 05. — Rev’It Seesoft Back Protector/Armor, RV 05.

Description – This is back armor from Rev’It, size RV 05.
Shape – Excellent.
Price I’m Asking – $25 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Scottoiler Chain Lubrication System Oil Refills

Scottoiler Chain Lubricator Oil Refills, 500ml, with spouts.

Description – These are a 500ml summer viscosity and a 500ml winter viscosity refills for the Scottoiler auto chain lubrication system.
Shape – Unused.
Price I’m Asking – $10 USD for both. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Shoei 35mm GT Air Cheek Pads

Used Shoei GT Air Wanderer 35mm Cheek Pads. — Used Shoei GT Air 35mm Cheek Pads.

Description – These were too big for my fat cheeks. Only used a few times before being replaced.
Shape – Very good.
Price I’m Asking – $15 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
TEC Center Stand

TEC center stand for a Triumph Bonneville.

Description – This is a TEC center stand with none of the mounting hardware.
Shape – Excellent, unused.
Price I’m Asking – $40 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

FOR SALE
Third Party Turn Signals/Blinkers

Description – I bought these on eBay. Very heavy duty. These do not allow for running lights.
Shape – Excellent.
Price I’m Asking – $20 USD. Payment via PayPal.
Shipping – Shipping cost dependent on your location and how quickly you want it. Contact me and we’ll figure it out.
Contact me at: rudypospisil@gmail.com (my PayPal account).

SOLD

The following is a list of what I’ve sold. These items are no longer available. I’m merely listing them here for historical purposes.

9 thoughts on “USED PARTS”

Mike

On 2015-06-28 at 10:02

Hey Rudy,

I was wondering why you were selling your RAM mount. I was looking into getting one myself. Was the quality not up to par?

- Rudy Pospisil
  
  On 2015-06-28 at 22:35
  
  Hi Mike.
  The quality is very good. However, with clip-on handlebars there isn’t any space to install it. Also, in practice I found myself trying to use Google maps while riding and didn’t feel it was safe.
  Rudy
  
Mark Smith

On 2015-10-23 at 09:45

I saw your RAT post and I would like to purchase your OEM Triumph Bonneville EFI “Carburetor” Caps. Still for sale?

- Rudy Pospisil
  
  On 2015-10-24 at 00:32
  
  It’s yours!
  
Tom Barfield

On 2015-12-29 at 19:23

Interested in the stock levers and you can consider them sold . Would separate the header pipes and sell them separately ?

- Rudy Pospisil
  
  On 2015-12-29 at 21:23
  
  What would you offer for the header pipes themselves, Chef Bob?
  
  - Tom Barfield
    
    On 2015-12-30 at 16:29
    
    $100 and I do want the levers
    
Shane

On 2016-02-13 at 20:07

Hey there,

Came across your site. Are you still selling the Paolo Tarozzi Clip On Bars – 1″ with 7/8″ Drop Downs?

If so, please send a response.

Best,
Shane

- Rudy Pospisil
  
  On 2016-02-14 at 13:30
  
  Yes, still available. If an item is still listed on the page and hasn’t been moved to the SOLD section, it is still available.

9 thoughts on “USED PARTS”

Leave a Reply Cancel reply